online service
Customer service hotline
021-60570688
Customer service team:
Online Service
Service time:
9:00 - 18:00

powered by 300.cn    shanghai

Mobile website

©Copyright:ShangHai Dongda Chemical Co., Ltd     沪ICP备17001178号

WeChat

Product Center

Polyether and combined polyether

Page view:
Product name

Pipe insulation

Summary information
Affiliate classification
没有此类产品
I want to make an inquiry
Sample application
Product description
DonFoam611 PUR, PIR bubble series
 
DonFoam 611 is a PIR type combination polyether polyol, mainly used in the manufacture of cold insulation blocks and insulated pipe trays for petroleum and petrochemical pipelines. The combined polyether has the following characteristics:
 
1. Good fluidity and good dimensional stability.
 
2, can be used to produce block foam, cutting and forming, easy to produce foam of different sizes.
 
High flame retardant performance, up to B1 requirements.
 
3, the product is suitable for the use of material temperature 25 ~ 30 ° C, it is recommended to use the whole barrel, and mix and mix before use; recommended mold temperature 40 ~ 60 ° C, mold opening time 8 ~ 10 hours, open the mold after normal temperature 5 ~ Cutting can be done in 7 days.
 

project

index

Molding density       ≥kg/m3

50

Compressive strength     ≥MPa

0.28

Tensile Strength          ≥MPa

0.31

Thermal Conductivity     W/m.K

0.021

Shrinkage          ≤%

0.5

Water absorption rate    ≤%

3.0

Flame retardancy  

B2级以上

 

DonPipe311 shell bracket series
 
DonPipe311 is a full-water pipe type combined polyether polyol, which is mainly used to manufacture cold insulation blocks and insulated pipe supports for petroleum and petrochemical pipelines. The combined polyether has the following characteristics:
 
1. The product has good dimensional stability and high strength, and can be applied to various extreme environments.
 
2, the product has a wide range of applications, can be used to manufacture a variety of different density products.
 
3. The product is easy to process.
 

Molding density

GB/T 6343

160-500kg/m3

Closed cell ratio

GB/T 10799

≥90%

Initial thermal conductivity

GB/T 10294

30-60mW/(m.K)

Compressive strength

GB/T 8813

2-20MPa

Dimensional stability         24 hours  -20

                    24 hours 100

GB/T 8811

≤0.3%

0.5%

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article